Characteristics of evaporator

Product features

1. Inside diameter of evaporator is φ A 200 mm metal round basin with a height of approximately 100 mm.

2. The evaporator is of circular metal structure, and the inner wall shall be smooth. The evaporator blade shall be free of burrs, bruises and other defects.

3. All parts in contact with water shall be smooth, and their mutual matching or connection welds shall be tight and firm without water leakage.

4. All parts and components of the evaporator shall be assembled correctly without looseness, deformation and other defects affecting the use.

5. The protective layer applied to all parts and components of the evaporator shall be firm, uniform, smooth and free of defects such as delamination and corrosion.

6. The evaporator and the installation frame shall be easy to install, and the evaporator shall not be disconnected due to the influence of wind during normal use.

7. Accessories: a graduated measuring cup, a water reservoir, a mounting frame, and a wire mesh cover.